Mobile Navigation

Trusted by Police, Fire, Emergency Professionals and The Public Since 1983

Previous: Whelen 295SSA2 Single Tone Siren with Hand-Held Control Head
Next: Whelen Hands-Free Siren With PA - 295SLSA1

Whelen 295SDA1 Dual Tone Siren With Full Function Control Head

Item Code: 295SDA1
Whelen 295SDA1 Dual Tone Siren With Full Function Control Head
Whelen 295SDA1 Dual Tone Siren With Full Function Control Head
Whelen 295SDA1 Dual Tone Siren With Full Function Control Head
$722.28$926.00
You Save 22%
Availability: New ProductMore Info 1 - 2 Weeks

Total with selected add-ons:

QTY:
SIMILAR ITEMS FROM THIS CATEGORY
separator
separator

Whelen 295SDA1 Dual Tone Siren, For Two 100 Watt Speakers, with Full Function Control Head

SIREN FEATURES
• Two independent siren amplifiers in one housing, each can drive one 100 watt siren speaker. Short circuit protection.
• Under/over voltage protection.
• LED fault indicators for speaker and input voltage diagnostics.
• Title 13 compliant tone set-up.
• 20 programmable Scan-Lock tones. Any combination of 2 tones can be programmed to any siren tone switch.
• Horn-ring transfer relay built-in.
• Siren "in use" video recorder icon appears on video recording to confirm siren was in use.
• Siren disable (Park Kill) control input.
• Includes Radio Repeat and PA.
• When operating as a dual tone siren, two speakers are required.
• Two year warranty.

CONTROLLER FEATURES
• Eleven programmable power distribution switches (one 3 position slide switch and 8 momentary switches).
• Three 20 amp relay controlled outputs with built-in fuses.
• Eight 10 amp relay controlled outputs with built-in fuses (two of them include a choice of independent inputs or the standard power bus switching).
• Choice of 36 press-on legend tabs.
• Two wire Traffic Advisor™ control.
• Programming cannot be activated by a user in the cab.
• All switches can be programmed to activate any combination of the relay outputs.
• Any light control switch can be programmed to activate any of the 8 momentary switches.
• Momentary switches can be programmed to be activated as either a push-on/push-off, momentary, flashing, timed output, or TA control.
• Any of the 11 switches can be programmed to activate the siren into Hands-Free mode.
• Copy siren/switch configuration to another unit with "cloning" feature.
• Easy reset to factory default settings.

Specifications
• Dimensions: Controller: 3-1/2" (89mm) H x 6-7/8" (175mm) W x 1-1/4" (32mm) D.
• Dimensions: Amplifier: 2-1/4" (57mm) H x 8-5/8" (219mm) W x 7-1/8" (180mm) D.
• Weight: 5.25 lbs. (2.38kg).

Questions & Answers about Whelen 295SDA1 Dual Tone Siren With Full Function Control Head

Ask a question about Whelen 295SDA1 Dual Tone Siren With Full Function Control Head. Click here

What Our Customers ARE SayING

page id: 295sda1
divider
divider
cards